ADEMCO Via 30+ Installation Instructions Manual page 43

5816 Door/Window Transmitter
Has two unique input yoo?) codes: one for a
wired closed circuit contact loop, and the other
for a built-in reed switch (used in conjunction
INPUT with a magnet).
(LOOP) 5817 Multi-Point Universal Transmitter
1 Has three unique input (loop) codes: one for a
(PRIMARY) —_ DIP switch settable "Primary" contact loop, and
the others for two "Auxiliary® closed circuit
2 contact loops. The "Primary" loop may be set for:
7 (AUX. CENTER) a) Repeating or Single Transmission, b) Normally
LaF =a Open or Normally Closed Circuit, c) Slow or Fast
Mines
SISISISISIS)
3 Response, and d) 3 Minute or No Transmission
(AUX. RIGHT) —[nhibit.
code.
5827 Wireless Keypad
Can be used to turn the burglary protection on
and off, and features the same built-in panic
6)
functions as wired keypads for either silent or
INPUT
(LOOP)
2
(REED)
(TERMINALS)
audible 24 hour alarm. An LED indication lights
INPUT each time a key is pressed, to verify
(LOOP) transmission.The keypad is identified as zone
1 "00" on wired keypads when it transmits with a
LEARN AS "RF" low battery .
Can operate the system similarly to wired
keypads and can indicate system status via its 3
LEDs and sounder. Includes 3 panic keys for 24
5827
5827BD
hour silent or audible alarm. Requires a 5800TM
Transmitter Module, to operate in conjunction
with system's 4281/5881 receiver. Key
rogrammed, has no DIP switch. The keypad is
identified as zone "00" on wired keypads when it
transmits with a low battery.
5849 Glass Break Detector/Transmitter
Note: There is a 3 minute lock-out between fault
transmissions to conserve battery life.
TO THE INSTALLER
Regular maintenance and inspection (at least annually) by the installer and frequent testing by the
user are vital to continuous satisfactory operation of any alarm system.
~43-