ADEMCO Via 30+ Installation Instructions Manual page 45

ACTION DESIRED
Close relay at start of entry time and reset with key entry of
security code + # + 7. *
*Can be used to turn on a light when entry door is opened.
Close relay after any burglary alarm and reset with key entry
of security code + # + 8.*
*Can be used to turn on lights in the event of a burglary
alarm...(NOTE: Response types 06, 08, and 09 will not
activate relay).
Zones in zone list (x) close relay on alarms and reset with
key entry of security code + # + 7. (Possible use with strobe
light)
Zones in zone list (x) pulse relay on alarms and reset with
key entry of security code + # + 7.
A system low battery detection causes relay to close for 2 1
seconds."
An AC loss detection causes relay to close for 2 seconds."
*The relay will not reset on restoral of low battery or AC
power. For this reason, using "close for 2 seconds" in
A(action) is recommended.
~45—