ADEMCO Via-30PSE Quick Manual

Hide thumbs Also See for Via-30PSE:

Quick Guide:

For a detailed review of the entire system, please view the

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].



To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].



To arm in MAX when there is no entry delay, enter your [security code] + [MAX].



Disarm:

To disarm, enter your [security code] + [OFF].



The Ademco Via 30PSE operates on a UB 1270 battery.



Ademco Via-30PSE

Ademco Via – 30PSE system manual.

Table of Contents

Do you have a question about the Via-30PSE and is the answer not in the manual?

Page 1  To arm in MAX when there is no entry delay, enter your [security code] + [MAX].  Disarm: To disarm, enter your [security code] + [OFF].  Battery The Ademco Via 30PSE operates on a UB 1270 battery. ...
Page 2 Loss of AC power and use of backup battery power is indicated by NO AC. or AC LOSS.  A low battery condition is indicated by BAT or SYSTEM LO BAT  For instructions on replacing your battery, please visit our Battery Replacement Page.
Page 3 For wireless sensors, check that no environmental changes have blocked the wireless sensor. If the problem is corrected, enter your [security code] + [OFF] sequence twice.  For a list of Trouble Conditions other than CHECK, please see your Ademco Via – 30PSE system manual.