Watson-Marlow qdos H-FLO Reference Manual page 42

9.1.2.3 Surface and orientation
The pump must be installed as follows in accordance with the illustrations and explanations
table below:
On a surface:
Number Information
1 Install the pump on a level surface.
2 With a surface mounting (such a plinth):
A mounting slope can cause poor lubrication, resulting in damage to
the pump though accelerated wear. Install the pump on a level surface
• Suitable to ensure that the fluid path inlet connections has adequate
space to be installed and removed.
Suitable to ensure that the pump is at a comfortable height for
•
operation
Rated to support full weight of complete assembly and pumped
•
product
Chemically compatible with the fluids being pumped
•
Free of vibration
•
Excessive vibration can cause poor lubrication, resulting in damage to
the pump though accelerated wear. Install the pump on a surface free
from excessive vibration.
NOTICE
NOTICE
42