Watson-Marlow qdos H-FLO Reference Manual page 188

22.1.1 CHANGE MODE>Manual
The manual mode is the default mode. Manual mode allows the drive to be operated from the
HMI interface. In this mode the drive speed can be set from the keypad and the drive started and
stopped from the keypad.
If manual MODE is selected while a pump is running, the pump will stop.
22.1.1.1 To access Manual mode:
From the Mode Menu
1 Use +/- keys to highlight
2
Press SELECT
For more information on the home screen see section 4.11.2
he Mode Menu
Manual choice
and Manual home screen will be displayed
188