Watson-Marlow qdos H-FLO Reference Manual page 161

17.3.2 Procedure: Set IP address using the HMI
Configuring the IP address can be undertaken by two methods:
Method 1: Set static IP Address (manual, DHCP disabled)
•
• Method 2: Set dynamic IP Address (automatic, DHCP enabled)
17.3.2.1 Procedure: Method 1: Static IP address.
By default, DHCP is enabled. The means the drive will automatically receive an IP address when
the drive is connected to a network.
If a static IP address is to be used, the DCHP must first be disabled. Follow the procedure to
disable the DHCP and set a static IP address
1. Highlight the DHCP setting
2.
Choose DISABLE
3. Select the IP address
4.
Press SET .
5. Use +/- keys to scroll to enter the highlighted values.
6.
Use NEXT to move to next value
.
161