Watson-Marlow qdos H-FLO Reference Manual page 103

14.4.3 Control settings>Configure inputs
The following inputs 1
Item
Start/Stop
Contact
Fluid recovery
Input 1 and 2 may also be configured in relation to floating ground, as a sub-
NOTE 1
menu. This is explained in 23.1.8
14.4.3.1 To configure inputs:
From the MAIN MENU
Use +/- keys to highlight
1
2
Press SELECT
Configure Input
3 Highlight
4
Press SELECT
can be configured in control settings:
Summary
Configure polarity
Configure polarity, assign input
Configure polarity, assign input
CONTROL SETTINGS
.
option.
.
103