Watson-Marlow qdos H-FLO Reference Manual page 114

14.4.5.2 Effect on Analog 4-20 mA mode: A and B points
The scaling factor
• Will not alter stored A and B points, set i n An a l o g 4- 2 0 m A m ode
• Speed limit cannot exceed high flow rate set point (B).
14.4.5.3 To configure scaling factor:
Main Menu
1. From the
2. U se +/- keys to access
3. Use +/- keys to enter multiplication factor.
4. SELECT .
5. ACCEPT to confirm new
use +/- to select Control
Scaling Factor.
4-20 mA Profile Figures
Settings.
114