Watson-Marlow qdos H-FLO Reference Manual page 32

4.9.4 MAIN MENU overview
The MAIN MENU is the highest level menu. All features, functionality and settings are accessible
through this menu and subsequent sub-menus.
The main menu screen is shown below.
MAIN MENU Screen:
Item Description
1 User selected sub menus.
2 Menu selection.
3 SELECT and EXIT options accessible by using soft keys.
The main menu contains the following sub menus:
Sub menu
Fluid level monitor
Security settings
General settings
MODE menu
Control settings
Help
Summary
Menu used to set up and view the inlet vessel
fluid level.
Menu used to control the access to the pump,
such as PIN protection
Menu used to make general settings such as
language, flow units, asset number, restore
defaults etc
Menu used to change the mode of the pump,
such as manual, analog or network mode
Menu used to set control settings such as
pumphead speed limit, reset run hours,
configure inputs and outputs.
Menu used to display help, such as a link to these
instructions, the asset number, or software
version.
32