Watson-Marlow qdos H-FLO Reference Manual page 163

17.3.2.2 Procedure: Method 2: Set dynamic IP Address
(automatic, DHCP enabled)
DHCP is enabled by default, it is only necessary to re-enable DHCP if it was previously disabled
when an IP address was manually set.
1. Highlight the DHCP setting
2.
Ensure that DCHP is Enabled by pressing
A DHCP server within the network allocates the drive an IP address based on the MAC
address.
A DHCP server within the network will now allocate the drive an IP address based on the MAC
address.
ENABLE .
163