Watson-Marlow qdos H-FLO Reference Manual page 30

4.9.2 HOME screen
The HOME screen is the main screen showing the last selected operating mode in Manual
Mode. This screen is accessed using the HOME key.
An example of a HOME screen in Manual Mode is shown below.
Home Screen: (Manual mode)
Item Description
1 Indicates menu selection.
2 Indicates network is connected, (EtherNet/IP shown)
3 Displays pump label
4 Indicates keypad lock is enabled
5 Indicates pump is in Auto start mode (when Auto start is enabled)
6 Displays pump speed and units
7 Indicates MENU and INFO options accessible by using soft keys
8 Progress bar only displayed if Fluid level monitor or Revolution options are enabled
9 Indicates pump running status
The pump displays a RED stop icon when it is in a manually stopped
condition. In this state the pump will not start unless the START key
is pressed
The pump displays a RED PAUSE icon when it is receiving a remote
stop input whilst in a standby condition. The pump is placed in a
standby condition by pressing the START key in manual mode, or by
selecting Analog mode. In this state the pump will respond to a
change in state of the start/stop input and may start automatically
when it receives a control signal.
When the pump is running it displays a turning icon to indicate a
pumping state
30