27.7.1 Conditions
•
Products must be returned by pre-arrangement to Watson-Marlow, or a Watson-
Marlow approved service centre.
•
All repairs or modifications must have been made by Watson-Marlow Limited, or a
Watson-Marlow approved service centre or with the express permission in writing of
Watson-Marlow, signed by a manager or director of Watson-Marlow.
•
Any remote control or system connections must be made in accordance to Watson-
Marlow recommendations.
•
All PROFIBUS systems must be installed or certified by a PROFIBUS approved installation
engineer.
•
All EtherNet/IP systems must be installed or certified by a EtherNet/IP approved
installation engineer.
•
All PROFINET systems must be installed or certified by a PROFINET approved installation
engineer.
27.7.2 Exceptions
•
Consumable items including tubing and pumping elements are excluded.
•
Pumphead rollers are excluded.
•
Repairs or service necessitated by normal wear and tear or by lack of reasonable and
proper maintenance are excluded.
•
Products which, in the judgement of Watson-Marlow, have been abused, misused, or
subjected to malicious or accidental damage or neglect are excluded.
•
Failure caused by electrical surge is excluded.
•
Failure caused by incorrect or sub-standard system wiring is excluded.
• Damage by chemical attack is excluded.
• Ancillaries such as leak detectors are excluded.
• Failure caused by UV light or direct sunlight.
• All ReNu pumpheads are excluded.
•
Any attempt to disassemble a Watson-Marlow product will invalidate the product
warranty.
Watson-Marlow reserves the right to amend these terms and conditions at any time.
232