RMG TME 400-VM Operating Manual page 33

Note
The operator should record the overall measurement data (meter and operat-
ing data) during the entire operation in order to be able to recognize causes
of potential damage at an early stage and to intervene in good time.
Remedy and/or relief of critical operating statuses can be achieved, for
example, with the following measures:
Start-up screen (MW < 0.15 mm)
•
Filter
•
Meter protection perforated plates (Ø 3 - 4 mm)
•
Valves with control drive (flow change)
•
Check valves (pulsation, backflow)
•
Manual TME400-VMF · EN11 · January 22nd, 2024
1 Introduction
29