Introduction; Structure Of The Manual - RMG TME 400-VM Operating Manual

1 Introduction

1.1 Structure of the manual

The introduction of this manual comprises two parts. The first part lists general speci-
fications; the symbols used in the manual and the structure of notices are presented
and a risk assessment is provided. The differences between the TME 400-VM and
TME 400-VMF turbine meters are explained. If there is no explicit reference to differ-
ences, the TME 400 is superordinate for both versions of the turbine meter.
Note
This manual refers to the TME 400-VM and TME 400-VMF instead of the com-
plete turbine meter.
In addition, the first part includes specifications for the transport and storage of the
TME 400. The second part of the introduction describes the features and areas of ap-
plication of the TME 400; basic standards are listed and the pressure and tempera-
ture ranges in which the TME 400 can and may be used are pre-adjusted.
The second chapter describes the electrical and mechanical commissioning of the
TME 400. An explanation of how to achieve the reliable commissioning of the meter
and high precision is provided.
The third chapter explains the displays of the TME 400. It explains resetting, booting
and replacement of the battery.
The settings of the TME 400 are explained in chapter four. In particular, all adjustable
parameters are provided there with some explanations.
The fifth chapter summarizes the technical data and the sixth chapter provides a list
of error messages.
The appendix provides details about the Modbus, measurements, type plate and seal
plans. Then the certificates and approvals are listed.
Manual TME400-VMF · EN11 · January 22nd, 2024
1 Introduction
1