4 Operation
V
Note
56
With the TME 400-VM and TME 400-VMF turbine meters, the p/T and Calc.
columns cannot be selected.
With the cursor buttons (arrows)
you can reach each value by gently pressing the desired button in this coordinate
system.
Keypad
◄
▲
▼
►
OK
Manual TME400-VMF · EN11 · January 22nd, 2024
Q
p/T
Calc
Figure 12: 8 columns of the coordinate system
◄
▲
Description
Effect
Left arrow
Switches the column of the table from right to left
Upward movement within the column of the table:
You move from the last value of the list towards the
Up arrow
first value.
This is also used to adjust numbers (counting up).
Downward movement within the column of the table:
You move from the first value of the list towards the
Down arrow
last value.
This is used to adjust numbers (counting down).
Right arrow
Switches the column of the table from left to right
The following functions are triggered by pressing:
pressed < 2 seconds = display of the coordinate
Function
pressed > 2 seconds = switch to settings mode
I/O
Par
OK
▼
►
(see below)
Status
Info