Audi R8 2009 Owner's Manual page 61

- Pull the lever back towards you to switch off the high
beam.
Headlight flasher
~D
- Pull the lever toward the steering wheel
©
to use the
headlight flasher.
Notes on these features
• The turn signals only work with the ignition switched on. The
indicator lights ¢ or
c::>
in the instrument cluster=> page 16 also
blink.
• After you have turned a corner, the turn signal switches off auto-
matically.
• The high beam works only when the headlights are on . The indi -
cator light ~D in the instrument cluster illuminates when the high
beams are on.
• The headlight flasher works only as long as you hold the lever -
even if there are no lights switched on . The indicator light ~D in the
instrument cluster illuminates when you use the headlight flasher.
0
Note
Do not use the high beam or headlight flasher if you know that these
cou ld be blinding oncoming traffic. •
Controls and equip-
ment
Clear vision
Interior lights
Interior lights
The interior lights include the reading lights for the driver
and the front passenger.
Activating door contact circuit
Fig. 48 Section from
headliner: Interior
lights
- Press the button @ . The LED in the button illuminates.
Deactivating door contact circuit
- Press the button @ . The LED in the button goes out.
Front reading lights
~
- Press one of the switches ® to turn the right or left
reading light on or off.
With the door contact circuit, the interior lights turn on as soon as
you unlock the vehicle or open the doors. The interior lights are also
turned on when the ignition key is removed. The lights turn off
about 30 seconds after the doors are closed. When the vehicle is
locked or when the ignition is turned on, the interior lights are
turned off. .,,_
Vehicle care
I
I
Technical data