Technical Service Bulletin
72 Seat fore-and-after adjustment incorrect
72 22 45 2058268/2 July 12, 2022. Supersedes Technical Service Bulletin Group 72 number 20-22 dated January 17,
2020, for reasons listed below.
Model(s)
Year
2017
R8 Spyder
2018
Condition
REVISION HISTORY
Revision
Date
2
-
1
01/17/2020
Customer states:
• The seat backrest panels are damaging the rear panel trim panel and/or windscreen.
• The seat cannot be moved backward far enough.
Workshop findings:
• One or both sides seat backrest panels chafe on the rear panel trim panel and/or windscreen resulting in
damaged trim panels and/or windscreen.
© 2022 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to
other sites, without the prior expressed written permission of the publisher.
VIN Range
901529 – 905737
900030 – 900262
Purpose
Revised title
Condition
Revised
and
Initial publication
Page 1 of 6
Vehicle-Specific Equipment
Not Applicable
(Add customer complaint)
Need help?
Do you have a question about the R8 Spyder and is the answer not in the manual?
Questions and answers