Table of Contents
Advertisement
Dri ve r inf o rmation
sy st e m
[ i
J
Tip s
Even though your vehicle is equ ipped with a speed warning system,
you should still watch the speedometer to make sure you are not
driving faster than the speed limit. •
App lies to vehicles: with speed warning system
Speed
warning
1 : setting
a speed
limit
Warning threshold 1 is set by the button .
Storing
th e m a ximum
speed
Drive at the desired maximum speed.
Fig. 25 Sect ion of
inst rum ent cluster:
Set /Check butt on
-
Press the knob button => fig. 25 until the symbol
=> page
33,
fig. 24 appears.
Re s etting
the maximum
sp ee d
-
Drive t he vehicle at a speed of at least 3 mph (5 km/h)
-
Press the knob for more than 2 seconds .
The speed warning symbol ,. (USA models)/
(Canada models) will
appear briefly in the display when you release the but ton to indicate
that the maximum speed has been stored successfully. The
maximum speed remains stored until it is changed by pressing the
button again briefly or until it is deleted by a lengthy push on the
but ton. •
Appl ies to vehicles: with speed warn ing system
Speed
warning
2 : setting
a speed
limit
Switches in the wiper arm are used to operate warning
threshold 2.
-A
To store maximum
s p e ed
- Turn off the ignition.
0
0
N
~
ti!
Fig. 26 Controls
-
Briefly press the button in the instrument
cluster
=> fig. 25. The odometer and the digital clock are now illu-
minated.
-
Press the button for at least 2 seconds . The currently
stored maximum speed appea rs in the display
or
the
crossed out symbol for wa rning threshold 2, if no
maximum speed was set previous ly.
-
Press the function selector switch in the w iper lever @
=> fig. 26 up or down to change the set value. Values run
up or down in steps of 6 mph (10 km/h).
..,
Advertisement
Table of Contents
