Audi R8 2009 Owner's Manual page 33

After being saved, the first recorded lap t ime moves from the lowest
to t he next highest line in the display
(D
=> page 30, fig . 20. The
lower line © identifies the newly started lap t ime . •
Recording additional lap times
Fig. 21 Display: Lap 2
is saved
After starting the lap timer, a timed lap is completed and
stored and t iming begins for the next lap every time the
upper section of the rocker switch is pressed. Cont inue as
described above to measure additional lap times.
The current lap time is displayed in the bottom line of the disp lay @
=> fig . 21.
Aft er being saved , t he last recorded lap time moves from the lower
to the next higher line on the display @=> fig. 21. The lap time
before the last one also moves up one line @. The lowes t line @
identifies the newly started lap time . •
Controls and equip-
ment
Dri ve r in f or ma ti o n s yst e m
Displaying split time or inserting a pause
Split time is indicated by a star.
Fig. 22 Display:
Showi ng a split time
It is possible to recal l split times for specific stretches. If you
would like to in sert a pause during a lap , you can stop the
time recording.
Di s pl a y in g s plit time or in se rting a p a u se
- Press on t he lower section of the rocker switch to display
the split time @ . While the spli t time mar ked wit h a star
is being displayed, the time recording conti nues to run in
the background.
- Press the lower section of the rocker switch again to
insert a pause. Timing is interrupted, the star in the last
row disappears.
R e suming tim ing
- Press the upper section of the rocker switch to resume
t iming from the split time or pause display . •
Vehicle care
I
I
irechnical data