Audi R8 2009 Owner's Manual page 27

Hide thumbs Also See for R8 2009:
Table of Contents

Advertisement

Trip computer
Introduction
The trip computer gives you information
on current and
average fuel mileage, average speed, fuel range and
driving time .
Fig. 10 Trip computer
1
You can switch between the trip computer 1 and 2 by pressing the
I
Reset j button @ ~
page
26, fig. 11.
You can tel l which memory leve l is currently active by the number in
the display ~ fig . 10. The data from the single -trip memory
(memory level 1 l is be ing disp layed if a 1 appears in the display. If a
2 is shown, then the data from the total -trip memory is being
displayed (memory level 2).
Single-trip
memory
(Trip computer
1 )
The single-tr ip memory stores the trip information from the time the
ignition is turned on until it is turned off. If the trip is continued
within 2 hours from the time the ignition was turned off, the new
data will be inc luded in the calcu lation of the current trip informa -
t ion . If the trip is in terrupted for more than 2 hours the memory is
reset automatica lly.
Controls and equip -
ment
Driver
information
system
Total-trip
memory
(Trip computer
2)
Unlike th e single -trip memory, th e total -trip memory is not reset
automatically . This permits you to evaluate your driving data for the
entire period between manua l resets.
Fuel range
The estima t ed cruising range in miles (km) appears in the display.
The display changes in increments of 6 mi les (10 km) .
Average
fuel mileage
The average fuel economy in MPG (1/100 km) since you last cleared
the memory appears in this display .
Current
fuel mileage
The in st antaneous fue l consumption
in miles per gallon (1/100 km)
is shown in this display. When the vehicle is stationary, the most
recent fuel consumpt ion is displayed.
Average
speed
The average speed in mph (km/h) sin ce t he last time the display was
reset appears in the display.
Elapsed
time
The length of time that you have been driving since you last reset
the memory appears in this disp lay. The maximum time period that
can be recorded is 999 hours and 59 minutes.
Distance
The elapsed distance since the last time the memory was cleared
appears in the display. The maximum distance that can be recorded
is 9,999.9 miles (9,999.9 kilometers).
[ i ]
Tips
All stored values wi ll be lost if the vehicle battery is disconnected . •

Advertisement

Table of Contents
loading

Table of Contents