Data I/O 298 Manual page 52

The prompt ( /\) following "SELECT CODE" on the
display means that the two character hex select function
code must be entered before the procedure can
continue.
2.
E??::1
to select the format number function.
298 Displays
"B3)
3.E?JG
298 Displays
\I \I \I \I \I \I \I \I \I \I \I \I \I \I \I \I
I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\
to display the mnemonic for the current (or default)
format number.
If the displayed format mnemonic is the desired format
go to step 5. If it is not use go to step 4.
Press and release until the desired format appears
on the keyboard display. Press REVIEW to step the
display backwards.
298 Displays
\I \I \I \I II \I \I II \I \I \I \I \I
II I II I
I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ I\ ' " ' "
5.E4r::J
298 Displays
U-0Rr1RT
111n 111111111
1\IU ' " ' " ' "
the format number selection is complete.
84 NON BLANK FAIL Command
Use the following procedure to automatically fail non-blank
devices when the 298 is equipped with the optional
handler. If the optional handler is not connected the
command has no effect on the system. When power is
initially applied to the 298 with the optional handler
installed the default condition is to attempt to program any
non-blank devices detected.
1.E?:J
8
to select the select function.
298 Displays
( . . . . . . .
~_J_E_-
_L_E_,_C_T __ L_-_[!_, __
I'_,
t._--=- _ _ _
1_'_~)
The prompt ( /\) following "SELECT CODE" on the
display means that the two character hex select function
code must be entered before the procedure can
continue.
2.
E?i
to select the non blank fail function.
298 Displays
(SELE[
T
COIJE
3.
E??=i
298 Displays
4.E'J
to place the non-blank fail function in effect if the
optional handler is connected.
298 Displays
II 1n11 I TII
['Jfl
11_1
I \IUI \I .DL
flt
\II'
FRIL
3-26
10-990-0013