Data I/O 298 Manual page 11

298 PROGRAMMER
Base unit with keyboard; accepts Paks; contains
control electronics. 298 also contains standard
System Remote Controi (SRC) and Computer
Remote Control (CRCI software. An optional handler
interface can be used for fast, high-volume
progiamming of rv~OS and bi=potar PROMs.
PROGRAMMING PAKS
The standard Computer Remote Control (CRCI allows
you to save programs on disk or tape which may be
downloaded to the 298. System Remote Control
{SRC) allows you to send commands to the 298
from a terminal, and an optional Terminal Remote
Control ffRC~ is a terminal remote mode which is
compatible with that used in System 19
programmers.
*Terminal not included.
UniPak 2™ Gang Pak™
LogicPak™
Combined with appropriate plug-
in adapters, the Logic Pak™
allows you to design, program
and functionally test more than
80 logic devices.
Programs more than 600 popular
bipolar PROMs, MOS EPROMs,
and MOS EEPROMs.
Programs multiple MOS PROM
sets and gang programs MOS
PROMs for high-volume
programming operations.
MOSPak™
Programs more than 145 MOS
EPROMs and EEPROMs with no
additional hardware changes.
PROGRAMMING MODULES
Support device family
applications not covered by
programming Paks.
Figure 1-1. 298 System Components
1-3
10-990-0013