Setting Deceleration Rate; Saving A Program - Hanil Fleta5 Operating Manual

4. Operation

4.10 Setting Deceleration Rate

1. Press the Enter knob.
2. Turn the Mode knob to select DEC setting mode.
▶ DEC setting mode: DEC flashes.
3. Turn the Enter knob until the desired deceleration rate is displayed.
4. Press the Enter knob to save the value.
5. Do you save? appears.
Turn the Mode knob to select [Yes]
6. Press the Enter knob.

4.11 Saving a Program

1. Press the Enter knob until desired program number is displayed.
▶ You can see that the program number is changed on the PROG display.
2. Set the desired Speed/Time/ACC/DEC.
3. Press the Enter knob to save the value.
4. Do you save? appears.
Turn the Mode knob to select [Yes]
6. Press the Enter knob.
16 www.ihanil.com