Setting Acceleration/Deceleration; Saving/Calling Up A Program - Hanil Component R12 Operation Manual

4. Operation

4.6 Setting Acceleration/Deceleration

1. Press the ACC or DEC button.
2. Press the numeric buttons to set the desired ACC or DEC rate.
▶ ACC rate: 0~9 / DEC rate: 0~9
▶ The larger the acceleration rate, the faster the acceleration speed.
The smaller the deceleration, the slower the deceleration speed.
3. Press the Enter button.

4.7 Saving/Calling up a Program

[Saving]
1. Set the RPM(or RCF) / Run time / Accel, Decel rate / Temperature
2. Press the Program Save button.
3. Press the numeric buttons to set the desired program number.
▶ Up to 0~99 :100
4. Press the Enter button.
5. When "Do you store? Y/N" message pops up, press ACC(Save,Y) or DEC(Cancel,N)
button.
[Calling up]
1. Press the Program Call button.
2. Press the numeric buttons to set the desired program number.
3. Press the Enter button.
16/23 www.ihanil.com