Standstill And Disposal - Helios KWL 340 D Manual

Installation and Operating Instructions
Central ventilation unit – KWL 220/340 D
EN
Fig. 51 Fig. 52
9.6

Standstill and disposal

m
Danger to life due to electric shock!
m
DANGER
Live parts are exposed during dismantling and touching these live parts will lead to electric shock. Before dis-
nm
mantling, isolate the unit from the power supply and secure against unintentional restart!
Parts and components of the unit, whose service life has expired, e.g. due to wear and tear, corrosion, mechanical
load, fatigue and/or other effects that cannot be directly discerned, must be disposed of expertly and properly after
disassembly in accordance with the national and international laws and regulations. The same also applies to auxiliary
materials in use. Such as oils and greases or other substances.
The intended and unintended further use of worn parts, e.g. impellers, rolling bearings, filters, etc. can result in danger
to persons, the environment as well as machines and systems. The corresponding operator guidelines applicable onsite
must be observed and used.
Please think of the environment, you can make a significant contribution to the environmental protection by returning
batteries and accumulators!
30