Easycontrols 3.0 Cloud Service; Control Element; Building Control System; Menu Overview - Helios KWL 340 D Manual

Installation and Operating Instructions
CHAPTER 8
easyControls 3.0
SOFTWARE
Central ventilation unit – KWL 220/340 D
3. Double-click on the corresponding unit, cf. Fig. 45.
> The easyControls 3.0 controls open automatically via the web server in the web browser.
4. Configure unit settings, see section 8.1 „Menu overview", page 22.
ⓘ In order to operate the unit, the commissioning assistant must be complete, see section 6.2 „Run commissio-
ning assistant", page 15.
7.2

easyControls 3.0 cloud service

Users, service technicians or housing associations can change external unit settings or call up status information via
the easyControls 3.0 cloud service at any time. Registration with a username and password is required to use the ea-
syControls cloud service.
ⓘ The initial connection to the cloud service must take place via the local web server of the KWL
reasons.
The easyControls 3.0 cloud service is accessible via the website www.cloud.easyControls.net
ⓘ The KWL
unit must be connected to the internet.
®
7.3

Control element

The operating or control options for the KWL
(accessories) or the comfort control element KWL-BE Touch (accessories).
The installation, commissioning and detailed functional description can be found in the installation and operating inst-
ructions for the corresponding control element.
ⓘ A software update can be performed via the control element KWL-BE Touch.
7.4

Building control system

The KWL® unit can be integrated in a building control system network via the standard Modbus interface (RS 485) or
an optionally available KNX module KWL-KNX Connect (accessories).
ⓘ The associated operating instructions "KWL
www.HeliosSelect.de in the corresponding article.
8.1

Menu overview

easyControls 3.0 is the software for the smart and comfortable operation of the KWL
Settings can be configured in the following areas:
• Homepage (see section 8.2 „Homepage", page 22)
• Unit data (see section 8.3 „Unit data", page 24)
• Service menu (see section 8.4 „Service menu", page 24)
• Settings (see section 8.5 „Settings", page 25)
• Configuration (see section 8.6 „Configuration", page 25)
8.2

Homepage

The existing unit errors are displayed.

8.2.1 Switch units on/off

Switch units on/off in the Homepage menu, Fig. 39.
Fig. 45
unit can be extended via the slide switch control element KWL-BE Eco
®
easyControls Modbus" can be downloaded on HeliosSelect at
®
22
unit for security
®
units via a mobile end device.
®
Fig. 46
EN