Connections On The Back; An Post Requirements - Pitney Bowes SendPro C Auto User Manual

Connections on the back

Familiarize yourself with the ports on the back of your device.
1. USB port type A host - Connect a Barcode scanner or external scale to these ports.
2. USB port, type B host - Service personnel use only.
3. RJ45 - Use for a wired network connection.

An Post requirements

To prevent mail delays or rejections, follow An Post requirements.
Your device (Postal Security Device) has a license with the An Post. Therefore, you must follow a few
basic requirements.
Mail must have the correct date and postage amount shown.
l
Always ensure that your postal prints are clear and complete. Poor prints may result in An Post
l
being unable to offer the service you requested. Prevent mail rejections by An Post by ensuring
mail is legible.
If you move to another address, you must update An Post records. Contact your local device
l
supplier for advice.
Postal printing ink and the tape sheets for putting postage on larger items must conform to
l
postal specifications. For best performance, obtain ink cartridges and tape sheets directly from
your device supplier.
Each time you add postage to the device, a postal inspection occurs, as required by An Post. If
l
the interval between inspections is too long, the screen prompts "Inspection Due." Eventually, if
an inspection does not occur, the device prompts "Inspection Required." You won't be able to
use your device until you complete an inspection.
Pitney Bowes User Guide December 2023
15 • Product Information
122