User's Manual
CH U
: enable the voltage waveform display
on
CH U
: disable the voltage waveform display
off
CH I
: enable the current waveform display
on
CH I
: disable the current waveform display
off
5.5.1 Time Axis
The user can use the encoder knob to adjust the displayed time axis, so that the waveform of multiple signal
period can be observed. The time axis can select to 100us/div, 200us/div, 500us/div, 1ms/div, 2ms/div,
5ms/div, 10ms/div, 25ms/div, 50ms/div, 100ms/div, 200ms/div, 500ms/div, 1s/div, and 2s/div.
5.5.2 Vertical Axis
The vertical axis scale of the UTE310 waveform display is automatically selected by the instrument and
cannot be changed by the user through the key setting. The vertical axis scale for voltage and current is (rated
range/3)/div.
5.6 Integration
UTE310 supports the average active power integration and the current integration.
The integrated value and integration time can be displayed during integration. The instrument has three
integration modes, manual integration, standard integration (Normal) and continuous integration. The
integration interface is shown in the following figure.
Power integration in manual mode
Instruments.uni-trend.com
Power integration in standard mode
UTE310 Digital Power Meter
48 / 99