View-2; View-3 - UNI-T UTE310 User Manual

Digital power meter

Hide thumbs Also See for UTE310:

Table of Contents

User's Manual

UTE310 Digital Power Meter

5.3.2 VIEW-2

VIEW-2 can display 14 parameters at the same time. The user can choose this display style when they need

to observe several parameters at the same time. Press the [Meter] key to enter the Meter measurement

menu, and then press the function key below VIEW-2 to switch to the VIEW-2 display style, as shown in the

following figure.

VIEW-2 has two display interfaces, press the [

] or [

] key to switch.

Under VIEW-3 display style, mathematical operation can be carried out according to the user's demand,

supporting the display of four areas A, B, C, D. Each area can be set and displayed independently, and the

parameters displayed in A, B area can also be set to be displayed in the C area after arithmetic operation.

Press the [Meter] key to enter the Meter measurement menu, then press the function key below VIEW-3 to

switch to VIEW-3 display style, as shown in the following figure.

When selecting the VIEW-3 display style, the measurement window will be increased by three positions of F1,

Instruments.uni-trend.com

41 / 99

Table of Contents