UNI-T UTE310 User Manual page 25

Digital power meter

Hide thumbs Also See for UTE310:

Table of Contents

User's Manual

UTE310 Digital Power Meter

F.F

Indicates that the frequency filter is enabled.

RMS/DC/MN

Indicates that the measurement mode is RMS/DC/MN.

SYNC.OFF

Indicates that the synchronous source is not set.

SYNC.U

Indicates that the voltage is set as a synchronous source.

SYNC.I

Indicates that the current is set as a synchronous source.

Indicates that the measured voltage is lower than the rated range of 30%.

Indicates that the measured voltage is at the rated range of 30%～130% (not

include 130%) when CF=3;

Indicates that the measured voltage is at the rated range of 30%～260%

(not include 260%) when CF=6 or 6A.

Indicates that the measured voltage is at the rated range of 130%～140%

(not include 140%) when CF=3;

Indicates that the measured voltage is at the rated range of 260%～280%

(not include 280%) when CF=6 or 6A.

Indicates that the measured voltage is at the rated range of 140%～300%

(not include 300%) when CF=3;

Indicates that the measured voltage is at the rated range of 280%～600%

(not include 600%) when CF=6 or 6A.

Indicates that the measured voltage is greater than or equal to the rated

range of 300% when CF=3;

Indicates that the measured voltage is greater than or equal to the rated

range 600% when CF=6 or 6A.

Indicates that the measured current is lower than the rated range of 30%.