Table of Contents
Advertisement
User's Manual
7.4.3 Subnet Mask
A sbunetmask is a technique used in conjunction with an IP address to mask a portion of an IP address
to differentiate between a network identification and a host identification, and indicate whether the IP
address is on a LAN or a WAN. When the IP Model of the instrument sets to MANU, the subnet mask
should be set.
7.4.4 Gateway
The gateway is the channel address for a network to transfer information with other networks. When
the IP Model of the instrument sets to MANU, the gateway address should be set.
7.5 USB (Load and Save)
The user can store the setup parameters to the instrument's internal memory and external USB memory
through the memory function. The parameters that can be stored are the scale, measurement mode,
synchronization source, ratio setting, average function setting, input filter, maximum hold, mathematical
operation, data update interval, crest factor, integration setting, harmonic setting, memory setting, and
communication setting.
Chapter 8 Communication
UTE310 digital power meter supports USB, Ethernet, GPIB (optional) and RS-232 communication interface.
This chapter mainly introduces the relevant features of the communication interface and setup process.
8.1 RS-232 Interface
UTE310 digital power meter has an RS-232 communication interface, which allows the user to remotely send
SCPI commands to the power meter via the RS-232 interface. The power meter receives the relevant SCPI
commands and executes the functions corresponding to the power meter's front panel keys, which can
return measurement and calculation data, setup parameters and status bytes of control panel and error
codes.
UTE310 communication interface is DB9 male head, and the definition of pin as shown in the following figure.
Instruments.uni-trend.com
UTE310 Digital Power Meter
85 / 99
Advertisement
Table of Contents
