Lan Setting; Pc Connect To Ute310 Via Lan - UNI-T UTE310 User Manual

User's Manual
8.2.1 LAN Settings
1. Communication protocol: set the communication protocol of power meter to Modbus, the
setting method see subsection.
2. Selecting IP mode: DHCP (automatic acquire) or MANU (manually acquire).
Explanation
The user should correctly set the IP address, subnet mask and gateway for the power meter when the IP
mode is MANU.

8.2.2 PC Connect to UTE310 via LAN

PC Connect to a Single UTE310

PC Connect to Multi-UTE310

A PC connects to multiple UTE310 should through the concentrator or switch, as shown in the
following figure.
Explanation
Instruments.uni-trend.com
Support services DHCP, Remote control
UTE310 Digital Power Meter
88 / 99