Table of Contents
Advertisement
User's Manual
UTE310 Digital Power Meter
continue to integration, the integration will automatically stop and keep the integrated value and integration
time when the integration time reaches the set time of the timer. Pressing the combination key [Shift + Reset]
to reset the integrated value and integration time, and then press the [Start] key again to start the next
integration. The integration schematic of standard integration mode is as follows.
Standard Integration Process (including manual
Standard Integration Process
stop and reset)
5.6.2 Continuous Integration
In the continuous integration mode, the integration time and integrated value will be cleared automatically
after the integration time reaches to the set time, and the next integration will be restarted.
Setting Method
Press the [SET] key in the integration interface to enter the integration mode setting, switch the mode by
pressing [
] or [
] key, and then jump to the integration timer setting by pressing the [▼] key, and
increase or decrease the value by rotating the encoder knob when editing the integration timer, and then
press the [Enter] key to save the set parameters after the setting is completed. The integration schematic
of the continuous integration mode (including the process of manual stop, start, and reset) is as follows.
Instruments.uni-trend.com
50 / 99
Advertisement
Table of Contents
