Time Sequence Of Interface Signal - UNI-T LCR-1000 series Operation Manual

34,35,36 COM

4-2. Time Sequence of Interface Signal

T1: Trigger pulse width
T2: Delay time of starting measurement
T3: Trigger waiting time after /EOT output
results are valid.
Reference ground for external power source EXTV.
When using internal +5V power source for the HANDLER interface signal output,
reference ground of the LCR meter is connected with COM.
Fig.4-3 Time sequence chart
Time MIN Value MAX Value
1us
200us
Display time + 200us
0us
---