Comparsion Of Integration Mode - UNI-T UTE310 User Manual

User's Manual
Set Time: time of integration timer
Test Time: integration time
In the continuous integration mode, the time if timer cannot be 0, pressing the [Start] key when
the timer sets to 00000:00:00, the instrument will pop out "Error, the integration time of
continuous mode must be more than..." and the integration will not be performed.
5.6.3 Comparison of Integration Mode
Integration Mode
Manual Integration
Instruments.uni-trend.com
Cautions
Start Condition
Press the [Start]
key
Stop Condition
Press the [Stop] key
The integration will be
stopped when the
integrated value reaches
to the maximum value or
the minimum value.
Explanation
The minimum value is
negative value.
The integration will be
UTE310 Digital Power Meter
Repeat
Integration Hold
Integration
Hold the integration
time and the
integrated value
during the
integration is
stopped, until press
the [Reset] key.
/
51 / 99