UNI-T UTE310 User Manual page 78

User's Manual
�������� �������� (Measured data hold)

As shown in below, the measured data can be held by input the signal EXTI HOLD remotely or
pressing the [Hold] key.
�������� �������� (Update measured data)

As shown in below, the measured data can be updated by input the signal EXTI HOLD remotely
or pressing the [Single] key.
Remote Control Integration

�������� ���������� (Starting integration)
�������� �������� (Stopping integration)
�������� ���������� (Resetting integration)
���������� �������� (Integrating, the integration continues output its signal)
Sequence chart of integration remote control is shown the following figure.
Explanation
When start integrating, the signal ���������� �������� outputs low level, the signal ���������� ��������
outputs high level in other situations. The user can directly read its signal level to monitor
integration.
Instruments.uni-trend.com
UTE310 Digital Power Meter
78 / 99