Table of Contents
Advertisement
User's Manual
2.
Select the integration mode "Continuous" or "Normal" by pressing the [
3.
Save the selected mode and exit the integration mode settings by pressing the [Enter] key.
Integration Timer
1.
Press the [SET] key in the integration interface, and select "Set Time" by pressing [▲] or [▼]
key, the editing digital bit will be highlight with black color, as shown in the following figure.
2.
Increase or decrease the numerical value by pressing the encoder knob.
3.
Press the [Enter] key to save the setting and exit after the numerical value is set.
Integration Parameter
For the sake of simplicity, the function key at the bottom of the instrument display are partially
customized here, and the definitions of each function key are shown in the following figure.
1.
In the integration interface, press the "F1" key to switch to the power integration WP or the
Instruments.uni-trend.com
00001 ：
00
：
Hour
Minute
F1
F2
F3
F4
20
Second
F5
F6
UTE310 Digital Power Meter
] or [
] key.
54 / 99
Advertisement
Table of Contents
