Table of Contents
Advertisement
2.4 Oil
Important
• The engine may be damaged if operated with improper oil level.
• Do not exceed the MAX level because a sudden increase in engine rpm could be caused by its combustion.
•
Use only the recommended oil to ensure adequate protection, efficiency and service life of the engine.
•
The use of lubricants other than recommended may shorten the engine life.
•
Viscosity must be appropriate to the ambient temperature to which the engine is to be exposed.
Danger
• Prolonged skin contact with the exhausted engine oil can cause cancer of the skin.
• If contact with oil cannot be avoided, thoroughly wash your hands with soap and water as soon as possible.
•
For the exhausted oil disposal, refer to the Par. DISPOSAL and SCRAPPING.
2.4.1 SAE oil classification
•
In the SAE classification, oils are identified according to viscosity without considering any other qualitative
characteristic.
•
The code is composed of two numbers, which indicate, and must correspond to, the ambient temperature in
which the engine operates, the first number refers to the viscosity when cold, for use during winter ("W"),
while the second number is for viscosity at high temperatures.
2.2
VISCOSITY
WITH SPECIFICATIONS
•
Low S.A.P.S. oils, sulfate ashes <1% may not be used with fuels with a sulfur content >50ppm.
•
Filtration of oils is critical to proper operation and lubrication; always change filters regularly as specified in
this manual.
Internal Communication: For internal & partner use only.
TECHNICAL INFORMATION
RECCOMENDED OIL
10w-40 (-25°C ÷ +50°C)
SAE
5w-40 (-30°C ÷ +50°C)
0w-40 (-40°C ÷ +50°C)
API
ACEA
2
CI-4 Plus CI-4
CH-4
E7
E4
13
EN
Advertisement
Table of Contents
