Sleep; Information Menu (Info); Reset Menu (Reset) - Banner LTF12 Instruction Manual

LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual
Default: Normal
Sleep
The Sleep option sets when the display is put to sleep. Four timing options are available: 1, 5, 15, or 60 minutes. Sleep mode
is disabled by default. Sleep occurs in Run mode and any menu. To wake the sensor and return to the last viewed mode or
menu, press any button.
Navigate: MENU › DISPLAY › Sleep
Remote Input: Not available
Default: Disabled

Information Menu (INFO)

Use this menu to view model, part number (P/N), serial number (S/N), and firmware version (Version) information. Select one
of these options to view specific information for your sensor. This information is read-only.
Navigate: MENU › INFO
Remote Input: Not available

Reset Menu (RESET)

Use this menu to restore the sensor to the factory default settings.
Navigate: MENU › RESET. Select Yes to apply the factory defaults; select No to return to the Reset option without changing
any sensor settings.
Remote Input: Eight-pulse the remote input
32
Normal Display Orientation
MENU INFO
Select Menu Item
or
Press to Save Setting
Go Back to Parent Menu
or
Press and Hold to Go Back
to Run Mode
Information Menu Map
INFO Model Model LTF12K
INFO P/N
P/N 801130
INFO S/N S/N F..S..P..D..
INFO Version Version 1.0.0
© Banner Engineering Corp.
Inverted Display Orientation
June 22, 2023