System Commissioning; Indicators And Buttons; Setting Inverter Parameters Via Display Screen - Goodwe XS Series User Manual

User Manual V1.1-2023-12-30

8 System Commissioning

8.1 Indicators and Buttons

Equipment with display screen
Classification
Power
Running
Fault

8.2 Setting Inverter Parameters via Display Screen

• The corresponding inverter firmware version of the page images in this chapter is V1.00.00;
Communication version: V1.00. The page images are for reference only.
• The parameter name, range, and default values may be changed or adjusted in the future.
When configuring, the actual display shall prevail.
• The power parameters of the inverter must be set by professionals to avoid setting errors
that may affect the inverter's power generation.
Status
Yellow light steady ON: Wireless monitoring is normal.
One blink: Wireless module reset.
Two blinks: It is not connected to router/base station.
Four blinks: It is not connected to monitoring website.
It is not connected to monitoring server.
Blink:RS485 communication is normal.
Yellow light OFF: The wireless module is restoring factory
settings.
Green light steady ON: The power grid is normal and
successfully connected to the grid.
Green light OFF: It is not connected to the grid.
Red light steady ON: System fault.
OFF: No fault.
Description
NOTICE
35
System Commissioning