Goodwe XS Series User Manual page 40

System Commissioning
Display Button Description
• In all levels of menus, if the time without operation exceeds a certain value, the LCD display
screen will darken and the interface display will automatically jump to the initial interface.
• Short press of the operation button: Switch menu interface and adjust parameter values.
• Long press of the operation button: After the parameter value adjustment is completed, long
press and hold to set the parameters successfully; Enter the next sub-menu.
Example of key operation:
Long press
for 2S
Long press
for 2S
For Australia:
The user needs to enter a password to enter the sub-menu for parameter settings.
For the Australian Market, to comply with AS/NZS 4777.2:2020 please select grid/safety code
from Australia A, Australia B or Australia C. please contact your local grid operator for which
setting to apply
Long press
for 2S
Long press for 2S
Long press
for 2S
Long press
Short press
Initial password: 1111
Short press to
select numbers
from 0 to 9
Short press
Short press
Long press for 2S
Short press to adjust
Hundred digit numerical
value
for 2S
Short press
Long press
for 2S
Short press to
select numbers
from 0 to 9
Long press
for 2S
YES
Cancel
36
User Manual V1.1-2023-12-30
Short press
Short press to adjust
Ten digit numerical
value
Long press
for 2S
Long press for 2S
Long press
for 2S
Short press to
adjust
Single digit numer-
ical value
Short press to
select numbers
from 0 to 9
Long press
for 2S
Short press to
select numbers
from 0 to 9
Long press
for 2S