System Commissioning; Setting Inverter Parameters Via Lcd; Lcd Menu Introduction - Goodwe SDT Series User Manual

08 System Commissioning

8 System Commissioning

8.1 Setting Inverter Parameters via LCD

• Inverter software version shown in this document is V1.00.00. The screen shots are for
reference only. The actual display may differ.
• The name, range, and default value of the parameters is subject to change or adjust. The
actual display prevails.
• the power parameters should be set by professionals to prevent the generating capacity
from being influenced by wrong parameters
LCD Button Description
• Stop pressing the button for a period on any page, the LCD will get dark and go back to the
initial page.
• Short press the button to switch menu or adjust parameter values.
• Long press the button to enter the submenu. After adjusting the parameter values, long
press to save it.
Examples:
Long Press 2 s
Set Grid Type
Set N-PE
Long Press 2 s
Set Grid Type
Set N-PE

8.1.1 LCD Menu Introduction

This part describes the menu structure, allowing you view inverter information and set
parameters more conveniently.
Short Press
Long
Set Grid Type
Press
Star
Short Press
Long
Set N-PE
Press
Disable
NOTICE
Set Grid Type
Delta
Long Press 2 s
Set Grid Type Set Grid Type
Modify Success Modify Fail
Short
Set N-PE
Press
Enable
Long Press 2 s
Set N-PE
Modify Success
48
User Manual V1.3-2024-01-25
Short
Set Grid Type
Press
Return
Short
Set N-PE
Press
Return
Set N-PE
Modify Fail