System Commissioning; Indicators And Buttons; Setting Inverter Parameters Via Lcd - Goodwe DNS Series User Manual

User Manual V1.0-2022-12-15

8 System Commissioning

8.1 Indicators and Buttons

Indicator
Power
Operating
Faulty

8.2 Setting Inverter Parameters via LCD

• Inverter software version shown in this document is V1.00.00.13. The screenshots are for
reference only. The actual interface may differ.
• The name, range, and default value of the parameters are subject to change or adjustment.
The actual display prevails.
• To prevent the generating capacity from being influenced by wrong parameters, the power
parameters should be set by professionals.
LCD Button Description
This part describes the menu structure, allowing you view inverter information and set
parameters more conveniently.
Status
ON = WiFi is connected/active.
BLINK 1 = WiFi system is resetting.
BLINK 2 = WiFi not connect to the router.
BLINK 4 = WiFi server problem
BLINK = RS485 is connected.
OFF = WiFi is not active.
ON = The inverter is feeding power.
OFF = The inverter is not feeding power at the moment.
ON = A fault has occurred.
OFF = No fault.
Description
NOTICE
27
08 System Commissioning