Goodwe XS Series User Manual page 22

Installation
Installation Angle Requirements
• Install the inverter vertically or at a maximum back tilt of 15 degrees.
• Do not install the inverter upside down, forward tilt, back forward tilt, or horizontally.
Installation Tool Requirements
The following tools are recommended when installing the equipment. Use other
auxiliary tools on site if necessary.
Goggles
Diagonal pliers
Marker
Multimeter
Safety shoes Safety gloves
Wire stripper Hammer drill
Level Heat shrink tube
Cable tie Torque wrench
User Manual V1.1-2023-12-30
Dust mask
Heat gun
Rubber hammer
18
DC terminal
crimping pliers
DC wiring
wrench
Vacuum cleaner