Inverter Operation Mode - Goodwe XS Series User Manual

Product Introduction

3.5 Inverter Operation Mode

Waiting mode
Self-check mode
No. Parts
Waiting
1
mode
Self-check
2
mode
Grid-Tied
3
mode
Fault
4
mode
Upgrade
5
mode
Upgrade mode
Waiting stage after the inverter is powered on.
• When the conditions are met, it enters the self-check mode.
• If there is a fault, it enters the fault mode.
• If an upgrade request is received, it enters upgrade mode.
Before the inverter starts up, it continuously performs self-check,
initialization, etc.
• When the conditions are met, it enters the grid-tied mode, and the
inverter starts on grid connection.
• If an upgrade request is received, it enters upgrade mode.
• If the self-check is not passed, it enters the fault mode.
The inverter is grid-tied successfully.
• If a fault is detected, it enters the fault mode.
• If an upgrade request is received, it enters upgrade mode.
If a fault is detected, the inverter enters the fault mode. When the
fault is cleared, it enters the wait mode. After the wait mode ends, the
inverter detects the operating status and then turns to the next mode.
Turn to this mode when upgrading the inverter program. When the
program upgrade is completed, enter wait mode. After the wait mode
ends, the inverter detects the operating status and then turns to the
next mode.
User Manual V1.1-2023-12-30
Fault mode
Grid-Tied mode
Description
10