Inverter Installation; Moving The Inverter; Installing The Inverter - Goodwe XS Series User Manual

User Manual V1.1-2023-12-30

5.2 Inverter Installation

5.2.1 Moving the Inverter

• Operations such as transportation, shipment, installation and so on shall in compliance
with the laws and regulations of the country or region where the inverter is located.
• Move the inverter to the site before installation. Follow the instructions below to avoid
personal injury or equipment damage.
1. Consider the weight of the equipment before moving it. Assign enough personnel to
move the equipment to avoid personal injury.
2. Wear safety gloves to avoid personal injury.
3. Keep balance to avoid falling down when moving the equipment.

5.2.2 Installing the Inverter

• Avoid the water pipes and cables buried in the wall when drilling holes.
• Wear goggles and a dust mask to prevent the dust from being inhaled or contacting eyes
when drilling holes.
• The DC switch lock is provided by the user, with an aperture of φ 8mm, please choose a
suitable DC switch lock, otherwise it may cause installation failure.
• The anti-theft lock is provided by the user, with an aperture of φ 8mm, please choose a
suitable anti-theft lock, otherwise it may cause installation failure.
• Make sure the inverter is firmly installed in case of falling down.
CAUTION
NOTICE
19
Installation