Table of Contents
Advertisement
User Manual V1.0-2023-07-30
Installation Tool Requirements
The following tools are recommended when installing the equipment. Use
other auxiliary tools on site if necessary.
Goggles
Diagonal pliers
Marker
Multimeter
5.2 Inverter Installation
5.2.1 Moving the Inverter
Move the inverter to the site before installation. Follow the instructions below to avoid
personal injury or equipment damage.
1. Consider the weight of the equipment before moving it. Assign enough personnel to move
the equipment to avoid personal injury.
2. Wear safety gloves to avoid personal injury.
3. Keep balance to avoid falling down when moving the equipment.
4. Do not bump or hit the antenna. Otherwise, the antenna may be damaged.
5. Instead of lifting the cables directly, it is recommended to hold the handle of the inverter to
prevent potential damage to the cables.
Safety shoes
Wire stripper
Hammer drill
Level
Heat shrink tube
Safety gloves
Rubber hammer
CAUTION
15
05 Installation
Torque wrench
Dust mask
Heat gun
Vacuum cleaner
M8/M4
Cable tie
Advertisement
Table of Contents
