User Manual V1.0-2022-08-30
5.2 Inverter Installation
5.2.1 Moving the Inverter
1.
2.
3.
5.2.2 Installing the Inverter
when drilling holes.
The DC switch lock of appropriate size should be prepared by customers. The diameter of
the lock hole is 5mm. The lock might not be able to install if the size is inappropriate.
Step 1: Put the plate on the wall horizontally and mark positions for drilling holes.
Step 2: Drill holes to a depth of 80mm using the hammer drill. The diameter of the drill bit
should be 10mm.
Step 3:
Step 4: (Optional) Secure the DC switch with the DC switch lock, ensuring that the DC switch is
"OFF" during installation.
Step 5:
Step 6:
CAUTION
NOTICE
25
05 Installation