Installation Of Power Unit - TOHATSU MFS 60A Service Manual

Power Unit

41) Installation of Power Unit

Clean power unit mating surface, and install dowel pin 1
1.
and gasket 2.
Install power unit 3, and tighten bolts 4 in two or three
2.
steps to specified torque.
Power Unit Installation Bolt :
First Tightening Torque : 15 N·m (11 lb·ft) [1.5 kgf·m ]
Final Tightening Torque : 30 N·m (22 lb·ft) [ 3.0 kgf·m ]
Install apron 5.
3.
Reconnect cooling water (fuel cooler) hoses 6, fuel hose 7
4.
and flushing hose 8.
Install oil level gauge 9.
5.
6. Apply grease to sliding parts such as links and cables and
install pin to hold cable joint.
7. Connect neutral switch leads.
5-54
3
2
1
1
4
7 7
8 8
9 9
5
6 6
4st 60 2019