TOHATSU MFS 60A Service Manual page 15

Functional Limit
5.46 mm (0.2150 in)
5.44 mm (0.2142 in)
5.55 mm (0.2185 in)
5.57 mm (0.2193 in)
0.070 mm (0.00276 in)
0.100 mm (0.00394 in)
2.0 mm (0.08 in)
2.0 mm (0.08 in)
37.1 mm (1.46 in)
35.34 mm (1.3913 in)
#1: 41.89 mm (1.6492 in)
#2/3/4: 41.92 mm (1.6504 in)
#1: 0.150 mm (0.0059 in)
#2/3/4: 0.120 mm (0.0047 in)
18.05 mm (0.7106 in)
17.94 mm (0.7063 in)
0.090 mm (0.00354 in)
Wear, Damage, Elongation
Wear, Damage, Deterioration Due To Gasoline
Wear, Deterioration, Damage
40.8 mm (1.606 in)
0.25 mm (0.0098 in)
14.96 mm (0.5890 in)
0.11 mm (0.0043 in) (Including oil pump cover wear)
0.16 mm (0.0063 in)
4st 60 2019
Action To Be taken
Adjust into specified range.
Replace if less than specified limit.
Replace if more than specified limit.
Replace if more than specified limit.
Replace if more than specified limit.
Replace if less than specified limit.
Replace if less than specified limit.
Replace if less than specified limit.
Replace if more than specified limit.
Replace if more than specified limit.
Replace if less than specified limit.
Replace if more than specified limit.
Replace if necessary.
Check if rotating parts, sliding parts and sealing parts cause compression leakage.
Replace if out of specified range.
Replace if necessary.
Replace if out of specified range.
Replace if necessary.
Replace if more than specified limit.
Replace if more than specified limit.
Replace if less than specified limit.
Replace if more than specified limit.
Replace if more than specified limit.
2
2-9